MIMAKI CJV150 SERIES PRINTER CUTTER

Features:

• Ink type: Mimaki SS21 Eco-Solvent
• Colours: CMYKLcLm plus Lt Black, Orange or White
• Available widths: 1620mm, 1371mm and 810mm
• Orange and light black inks ensure faithful colour representation
• Highly reliable inkjet technology optimizes waveform to achieve the precise placement of the ink droplets onto media.
• Three-way intelligent heater system optimizes the ink droplets size
• MAPS3 reduces banding and uneven colour printing
• Versatile print and cut functions

Orange and light black inks ensure faithful colour representation

Orange ink

By using the SS21 orange ink as a process colour, 94.8% of the PANTONE colour chart is covered with approximate colours. Thanks to a wider gamut with the orange ink, food freshness can be simulated, and corporate colours can be faithfully represented.

Light black ink

SS21 light black ink and superior gray-balance control produce accurate grayscale printing without unexpected colour shifts. Smooth and non-grainy skin tones and grayscale gradation are delivered.

Highly-assured inkjet technology

Each ink colour has its own specific gravity and viscosity. To achieve precise placement of the ink droplets onto the media, Mimaki designed an optimum waveform that allows the printhead to jet each ink colour at the appropriate jetting angle without losing excellent ink droplet circularity. Moreover, various ink droplet sizes are precisely placed from the minimum size 4pl to the maximum size 35pl. Small droplets create beautiful high-resolution printing, and large droplets are very useful for high-speed printing. Thus, the CJV150 satisfies a wide range of needs including beautiful high-quality printing and productive high-speed printing.

Three-way intelligent heater system optimizes the ink droplets size

When the temperature of the media is not optimized, the perfect shape and size of droplets are not appropriately adhered onto the media. A patented three-way intelligent heater is built into the CJV300, and each heater maintains the temperature appropriately to obtain high-quality printing. The details of each heater are given in Figures below.

Quick-dry SS21 ink that achieves outstanding speed

SS21 ink was developed through the concentrated knowledge and technology of Mimaki. The SS21 ink dries quickly on the media due to a good balance between ink penetration and solvent volatilization. High productivity is achieved through high-density printing at high-speed modes without blocking and bleeding.

Mimaki Advanced Pass System 3 (MAPS3) delivers stable high-quality printing

Generally, swath boundaries are straight lines. Therefore, a slight misalignment between boundaries causes banding or uneven colour printing. MAPS3 reduces banding and uneven colour printing with blurred boundaries similar to gradation printing.

Versatile print and cut functions

Continuous register mark detection

The CJV300 automatically detects all register marks set by the RasterLink6 on the media, and cuts contour lines precisely by utilizing simultaneous automatic calibration.

Over-cut and corner-cut functions

The over-cut function ensures sharply cut edges with no residues by making a cross cut at the start and end positions of the contour cutting. The corner-cut function ensures sharply cut edges by making cross cuts at each corner.

Segment correct functions

This function detects intermediate register marks and enables four-point corrections for each segment to ensure accurate contour cutting over longer-length prints, even if the image is distorted.

Cut-and-print function

This function prevents common problems, such as film separation and faulty cut results, by cutting the media before printing.

Solutions for uninterrupted print operation

Nozzle check unit (NCU) automatically detects clogged nozzles and unclogs them.

Clogged nozzles are detected automatically by monitoring ink droplets with sensors. When clogged nozzles are found, the nozzles are automatically cleaned. A monitoring interval is set for each print dataset at specified time intervals. The NCU reduces waste printing after the occurrence of clogged nozzles.

Nozzle recovery system (NRS) for maintaining productivity

Previously, when the issue was not resolved after nozzle cleaning, the printhead needed to be repaired by a technician, and printing operation had to be stopped until the maintenance work was completed. The NRS allows the printer to continue print operations without interruption by using non-defective nozzles as substitutes for defective nozzles until the technician arrives.